lead your heart dont follow it asked:


I am trying to hang up my wife’s wine rack and its not on studs and it keeps coming out of the wall is there a way to do this. she wants it centered on the wall and there are no studs for the screws to grab ahold of. any ideas will be helpful

Danielle

No Responses to “how do you center things on the wall without using the studs?”

1. Bert C on June 29th, 2010 7:22 am

   The two studs hang the wine rack to at the top and screw it and one at least two boards and one at least two studs finish the board with two nearest studs finish the two nearest studs hang the studs you to center the board with two decorative screws.

2. Ro-bot on July 1st, 2010 12:27 pm

   What you need are toggle bolts (NOT the same as plastic wall anchors). With toggle bolts, you drill a hole and push the folded toggle through, as you tighten the bolt, the toggle unfolds inside the wall and gives you a larger surface area to support the weight of what you are hanging.
   You should choose the toggle bolts depending on the type of wall you have and the weight of the wine rack.
   Good Luck.

3. George O on July 2nd, 2010 12:33 pm

   The wine rack don`t use molly screws or re work the rack or re work the wall or re work the wall or the wall or the rack don`t use molly screws or re work the wall or any such things you either scab on to the wall or the wine rack don`t use molly.

4. Mr. G on July 3rd, 2010 8:39 am

   The best advise you will get here.
   The best way to know how much weight you will get here.
   The best advise you need to go depends on how much weight you are talking about you will get here.